ASG EVO Upgrades

We here at DLCustoms think the ASG EVO is pretty much one of the best stock AEGs available on the market right now – but there’s always room for improvement!

Have a look at our preset packages below or get in touch and we’ll put together a bespoke upgrade plan just for you!

All prices are inclusive of parts and labour fees but do not include postage or payment method fees (3.4% for Paypal, 5% for credit cards).

EVO Basic Tune Up: £50

You have to start with the basics. Our EVO BTU package will give you a smoother, quieter EVO with more consistent performance and improved reliability.

This package includes the following services:

  • A deep clean and degreasing of barrel, hop up unit and gearbox components
  • Installation of a sorbothane buffer pad onto the cylinder head to reduce impact stress
  • AOE adjustments on the piston to reduce stress on piston teeth
  • Properly shimming the geartrain and adjusting motor height
  • Replacing the piston O-ring with a high quality VITON O-ring and check compression train to improve efficiency
  • Application of high-quality silicone oil to gearbox components to improve efficiency and reduce wear
  • If needed, replace pot-metal Spring Guide with Steel replacement part from ASG (only on older ASG EVOs) £15 extra

EVO Level 1 Upgrade: £100

Want to make your EVO stand out on the field? Want to get an even snappier trigger response and a higher rate of fire?

Time to step up to Level 1.

This package includes the following services:

  • All the EVO BTU upgrades listed above
  • Modifying the gearbox shell to fit a custom Anti-Reversal Latch
  • Installation of an SHS 12:1 CNC Gen. IV gearset
  • Deans connectors fitted (including one battery and a converter cable to original connectors)

EVO Level 2 Upgrade: £160-200
(depending on barrel length)

Do you want more accuracy? How about more range?

Why not both? With our Level 2 package, you’ll see your groupings tighten up and your effective and absolute range increase!  Pair this upgrade with some good heavy BBs (we recommend 0.28g or 0.3g) and you’ll be amazed at the results.

This package includes the following services:

  • All the EVO Level 1 upgrades listed above
  • Installation of a Mapleleaf Crazy Jet Tightbore barrel of appropriate length for optimum accuracy
  • Installation of a Mapleleaf Hotshot Hop up rubber and M Nub for massively improved range

EVO-DSG: £200+
(depending on barrel length and requested RoF)

Do you need that ultimate trigger response in semi auto?

Do you need to be able to dump an entire midcap in 2 seconds?

Do you want your gun to sound like a chainsaw being put through a blender when you hit the fun switch?

Then you need a DSG.

A Dual Sector Gear set up is a special gearset which effectively fires once every half-turn of the sector gear, rather than once every turn. This literally doubles your rate of fire and halves your trigger response time.

How fast is fast? With our EVO-DSG package you can choose from a RoF between 40rps to 60rps!

This package includes the following services:

  • All the EVO Level 1 and 2 upgrades listed above
  • Installation of a Neodymium motor if necessary (Type and TPA dependent on user requested RoF)
  • Installation of a CYMA piston with a full steel rack, adjusted for AOE
  • Installation of an SHS DSG
  • Modification of the tappet plate and tappet plate spring to allow feeding at high rates of fire
  • Installation of an SHS 18:1 or 16:1 CNC Gen. IV gearset (dependent on user requested RoF)

EVO-DMR: £220-260
(depending on barrel length)

Want to really reach out and touch someone? Willing to give up full auto for that extra reach? Want to put the ‘marks’ in Designated Marksman’s Rifle? Need to go over the 1.27J maximum muzzle energy to get those long, long range shots?

You need our EVO-DMR package. With a maximum of 2.5J of muzzle energy (the UK legal limit which we must abide by), we’ve seen some of our DMR builds land hits on targets up to 80m away.

With our DMR builds, we recommend using 0.3g BBs or heavier.

This package includes the following services:

  • All the EVO Level 1 and 2 upgrades listed above
  • Installation of a CYMA piston with a full steel rack, adjusted for AOE
  • Installation of a SHS 18:1, 16:1 or 14:1 CNC Gen. IV gearset (dependent on user requested muzzle energy)
  • Installation of an appropriate spring for requested FPS
  • AEG locked to Semi-auto only by modifying the selector plate.

Extras:

R-Hop: £40

Do you want to eke out the utmost range out of your build? Not satisfied with being unable to fling BBs into orbit? Then you might want an R-Hop.

The R-hop is the ultimate hop-up system for lifting heavy BBs with the flattest and most consistent trajectories.

With an R-hop and a decent tightbore barrel, a 1.2J set up can easily put a 0.4g BBs past 65m.

Our R-hop builds are fully adjustable for all the common weights of BBs on the market from 0.2g to 0.5g, but we recommend using 0.36g and up with an R-hop, or you simply won’t see the benefit over one of our recommended MLCJ set ups.

Note: All R-hop installations will take a minimum of 2 weeks, as there is a testing regime which requires long ranges (60m+) and a bedding-in period.

Testing and bed-in period: The AEG will be tested with BBs from 0.3g to 0.5g to assess range and accuracy. This is an absolutely necessary step, to properly install an R-hop it must be bedded in with a minimum of 300 rounds to ensure optimum performance.

This package includes the following services:

  • A deep clean of barrel and hop up unit
  • Custom cut and hand fitted R-hop and M nub installed
  • Testing and bed-in period (see above)